Minneapolis · RFQs reviewed weekdays

5-Axis CNC Machining
in Minneapolis, MN.

Haas UMC-500SS · Tolerances to ±0.0002″ · ITAR Registered

Complex aerospace, medical, and defense parts in a single setup. A real engineer reviews the drawing, process, documentation scope, and release quantity. We target a response within one business day when the quote package is complete.

Haas UMC-500SS in-house
Zeiss Contura CMM verified
ITAR registered (DDTC)
AS9102 First Article reports
Material certs and traceability quoted as required
Prototype to production runs

Get a 5-axis quote

Built for a clean first review.

Add the commercial basics so engineering can price the right process.

Supplier decision date (optional)

This is ITAR-controlled. I will leave the part and notes blank and request approved transfer instructions.

Need to attach non-controlled drawings? Use the full RFQ page. For an ITAR-controlled project, do not enter technical data here; use the full RFQ to request approved transfer instructions.

When 5-axis is the right call

Send your 5-axis print if your part has any of these.

Compound angles or undercuts that 3-axis can't reach without rework
True-position callouts < 0.001″ across multiple features
Thin-wall structural parts where multiple setups would warp the part
Impellers, manifolds, turbine housings, surgical instruments
Production parts where setup time is killing your unit cost

Representative routing

Multi-face aerospace bracket · 7075-T6

3-axis

Multiple fixtures may be required

5-axis

Setup consolidation candidate

The drawing review determines whether 5-axis access can reduce fixtures, protect cross-face relationships, and lower setup-driven cost. No cycle-time or savings claim is made before CAM and workholding review.

Spec sheet

Haas UMC-500SS · in-house.

5-axis trunnion, 12,000 RPM BT40 super-speed spindle, Renishaw work + tool probing, through-spindle coolant, AS9100-aligned QMS.

Send your print

Travels (X / Y / Z)	19.7″ × 17.7″ × 17.7″
Trunnion	+110° / -35° A · 360° C
Spindle	12,000 RPM, BT40 super-speed
Tool capacity	40+1 side-mount
Achievable tol.	±0.0002″ on critical features
Probing	Renishaw work + tool
Coolant	Through-spindle

FAQ

Common 5-axis questions

What's the 5-axis envelope?

19.7″ × 17.7″ × 17.7″ on the UMC-500SS. Larger parts route to the VF-4SS 3-axis with 4th-axis indexer (50″ × 20″ × 24″).

Can you hold ±0.0002″ on production?

Yes — on critical features with CMM verification. Day-rate production tolerances are ±0.001″ with periodic CMM checks.

Do you handle ITAR drawings?

Yes — ITAR registered (DDTC). U.S.-persons-only access to controlled drawings. NDA before review on request.

Lead time?

Manufacturing lead time is quoted after drawing, material, outside-process, inspection, and capacity review. Include the required delivery window so the response can state a firm schedule.

5-Axis CNC Machining in Minneapolis, MN.